KISLING ERGO - ergo joint-retaining compound 4453 heat-resistant anaerobic 50 g

Application
For securing cylindrical joints with high resistance to acids, alkalis etc. Securing cylinder running sockets in engine blocks. Used also for bearing supports in heating furnaces.

Execution

Fast curing, high-strength and thermal-resistant product
Fast curing (can even be accelerated with an activator)
Withstands the highest static shear stress and also dynamic loading
Thermal resistance up to 175 °C
Solvent-free, good resistance to chemicals
Certified in accordance with DVGW (DIN EN 751-1), WRAS BS 6920 and ANSI/NSF Standard 61 for use in service water and drinking water
Complies with the suggested formulation of the German Environment Agency (contact with drinking water)
NSF S5 (formerly P1) listed for use in food processing environments
BAM tested for use in contact with pure oxygen up to ten bar and 60 °C

Advantage

Twist dosing cap: The patented twist dosing cap is a special feature of the ergo® adhesives
One-handed operation: opens and closes with one hand. The free hand can be used to secure the components
No clogging of the dosing opening: the nozzle is cleaned and completely sealed when the cap is closed fully
Extremely precise dosing: the cap can be unscrewed further to increase the flow of adhesive
One-piece bottle: bottle and dosing cap form one unit. Losing the cap is therefore impossible

Notes
ergo® activator 4900 for anaerobic adhesives, art. no. 1069875 100.

Safety instructions:
In case of contact with the skin, rinse immediately with soap and plenty of water and seek medical advice. Please contact us if you would like the corresponding safety data sheet and technical data sheet. Please observe the additional information on the containers.

Brand: KISLING ERGO
Type description: 4453 heat resist.
Weight of content: 50 g
Container: Bottle
Colour: Green fluorescent
Density: 1,1 g/cm³
Viscosity/consistency: Liquid
Min./max. viscosity: 450-650 mPas
Suitable for max. thread: M20
Max. gap-filling ability: 0,15 mm
Min./max. initial strength: 2-6 min
Min./max. functional strength: 0.5-1 h
Max. final strength: 4 h
Min. breakaway torque: 25 Nm
Min. prevail torque: 40 Nm
Min. compressive shearing strength: 27 N/mm²
Min./max. temperature resistance: -55 to +175 °C
Flashing point: 100 °C
Chemical basis: Dimethacrylic acid ester
Approval: DVGW | NSF ANSI 61 | NSF P1 | KTW | BAM | WRAS BS 6920

ergo joint-retaining compound 4453 heat-resistant anaerobic 50 g

ergo joint-retaining compound 4453 heat-resistant anaerobic 50 g

Description

Technical data

More details

Additional articles

Often bought together

ergo superglue 5011 universal for wood, metal, rubber etc. 20 g

ergo threadlocker 4052 medium-strength 50 g

ergo pipe thread sealant type 4207 anaerobic 50 g

ergo superglue gel, type 5039 for wood, metal, stone, ceramics etc. 20 g

Cyanoacrylate adhesive 5925 universal, quick-hardening, low-viscosity 20 g

LOCTITE 401 instant adhesive 3 g

ergo threadlocker 4101 high-strngth 50 g

ergo superglue adhesive 5011 SmartPen wood metal 30 g

LOCTITE 243 threadlocker 10 g

ergo hydraulic sealant type 4202 medium-strength 50 g

No workshop should be without it:

3D art. meas. stand with central clamping and micro fine adj., height 390 mm

ATORN quick-change bit holder, 1/4 inch x 60 mm

Twist drill bit set Sprint Master 25 pcs DIN 338 HSS D 1.0-13.0 mm in box

ATORN twist drill bit set N HSS TiN head DIN 338 1.0-13.0 mm 0.5 in box

ATORN A-Shield 2 cut protection glove, size 9

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10 mm 0.5 in box

ATORN ear defenders, 37 dB

Funnel set 6 pieces dia. 50, 75, 100, 120, 150, 160 mm polyethylene

ATORN bit box 32 pcs, slotted, PH, PZ, hexagon socket, TX, with holder a. handle

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm 3-flat shnk

LOCTITE LB 8040 rapid rust remover 400 ml

ATORN A-Mech 3 assembly glove, size 9

TX® screwdriver set 9 pieces T10-50

ATORN reusable corded ear plugs

Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6

ATORN cutter blade with 18-mm snap-off blade, metal housing, with slide

ATORN HSSE machine tap set M3-12 HSSE DL

ATORN 6-piece measuring instrument set, wooden case, digital vernier callipers

ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 in box

ATORN A-Shield 3 cut protection glove, size 9

ATORN try square stainless 150 x 100 mm in line with DIN 875 precision 1

ATORN bit socket wrench set, 6 pieces, hexagon head

ATORN LED magnifying lamp, 5 dioptres, 2-stage segment switching, 2.25x

Countersink set 90° HSS TiAlN shape C uneven pitch 3 clamping surfaces d. 6.3-25.0 mm

ATORN centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5

Prec. countersink set 5 pcs HSS-E Alunit d. 6.3/10.4/16.5/20.5/25.0 mm

ATORN ear plug dispenser

Blade scraper Argentax with extra wide handle replaceable blades

ATORN countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank

ATORN A-Mech 1 assembly glove, size 9

ATORN twist drill bit set N HSS-TiN head DIN 338 1.0-10.0 mm in assortment case

ATORN VDE screwdriver set, 3 pcs, cross head PH 1-3

ATORN centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5

ATORN HSSE machine tap set M3-12 HSSE GL

Cs. + cs. deburring tool set 6 pcs 90° HSS-E dia. 6.3-20.5 mm in metal box

ATORN cross-peen hammer 1,000 g with 3-component handle

HHW twist drill bit set DIN 338 HSS type N dia. 1-13.0 mm in box

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD

ATORN A-View 1 safety glasses

ATORN PZ screwdriver set, 3 pcs, PZ 1-3, round blade

Inspektionskamera VideoPocket HD

Pneumatic hose reel hose dia. 13 mm, hose length 15 m max. 20 bar

ATORN A-View 3 safety glasses

Cs. + cs. deburring tool set 6 pcs 90° HSS/TiN 6.3-20.5 mm in plastic box

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

ATORN steel cutting disc 125x1 mm

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

T-handle 416 RA T-handle Rapidaptor

Lamella flap disc LSZ-F Vision zirconia alumina grain 60 dia. 125 mm

Free-hand cutting disc, straight, universal line PSF STEELOX grit 60 125x1.0 mm

ATORN ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch

ATORN countersink set 90° HSS, extremely unequal pitch 6.3-20.5 mm

ATORN vernier calipers IP67 electr. 150 mm depth gauge flat

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 in box

ATORN analogue scriber 600 mm with fine adjustment

Industrial atomiser type R36.501 with 360° suction system

WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade

ATORN dial gauge, 10 mm meas. diff. 0.01 mm graduation shock-res, dia. 58 mm

ATORN TX screwdriver set, 5 pcs, TX 10, 15, 20, 25, 30

Pliers set, 3 pcs Combination pliers, snipe nose pliers, side cutters

ATORN hexagon screwdriver set, 9 pieces, 1.5–10 mm, with ball head, long